TIG WELDING TORCH ADAPTOR
To convert your welding power source to scratch
start tig you need the following
1. TORCH ADAPTOR
TRCX50 10/25 version £13.80
HEAD:
On one side is a 3/8 BSP RH male one piece tig torch coupling
On the other side is a 10/25 (14mm OD) dinse fitting
HOSE:
Ends in a 3/8" BSP RH female coupling (to argon hose or regulator)
<(OR)>
TRCX51 35/50 version £13.80
HEAD:
On one side is a 3/8 BSP RH male one tig piece torch coupling
On the other side is a 35/50 (21mm OD) dinse fitting
HOSE:
Ends in a 3/8" BSP RH female coupling (to argon hose or regulator)
2. TIG VALVED TORCH
TIG 9V TORCH, GAS COOLED, 110amp/DC,
95amp/AC
Maximum recommended tungsten, 1.6mm
TRSA4402 £37.80 4mtr Torch Valved
<(OR)>
TIG 17V TORCH, GAS COOLED, 140amp/DC,
125amp/AC
Maximum recommended tungsten, 2.4mm
TRSF4402 £40.64 4mtr Torch Valved
3. ARGON GAS HOSE (adaptor to regulator)
JD384 £6.00 ⅜" BSP fitted hose / 4mtr
4. ARGON REGULATOR
(Std UK commercial argon cylinders)
SW2051 £24.75 Argon Flowguage Regulator
2Guage/35ltr/min