HIRE TIG WELDERS
TIG WELDER (ADD ON UNITS)
£15 week: VIPER 200 DC
200amp, HF
"Needs 50V-100V OCV from a DC welder power source"
Duty 100% 200amps, 15kg
£30 week: STERLING UNISLOPE DC
300amp, HF
Latch. slope up/down, gas preflow/postflow
"Needs 45V-100V OCV and 110V AC from a MOSA TS model"
Duty 60% 300amps, 12kg
TIG DC WELDERS
£40 week: WSM-130 DC
Fitted with pulse arc making it very suitable for welding thin steel with minimum distortion
OUTPUTS:
MMA & TIG: 3amp to 130amps
OCV: 70V
DUTY @ 60% 130amps
CONTROLS:
Selector for MMA (ARC), TIG-HF
Pulse base current 5-130amps
Pulse width ratio 0.1-0.9, Pulse frequency 0.5-25Hz
Slope down 0.5-1.0sec (fixed), Gas post flow 3-5sec (fixed)
DATA:
350mm x 190mm x 260mm, 12kg
INPUT:
240V 11A
ATTACHMENTS INCLUDED
TIG TORCH: 4mtr tig 17 or 26 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
DUAL VOLTAGE 110/240V
£45 week: BUTTERS 163 HF-DV INVERTER
Fitted auto sensing input voltage. Just fit a 110V or 240V plug
OUTPUTS:
MMA: 10amp/20V to 125amp/25V
TIG: 5amp/10V to 155amp/16V
OCV: 55V
DUTY MMA @ 60% 110amps/24volts
DUTY TIG @ 60% 130amps/15volts
CONTROLS:
Selector for MMA (ARC), TIG-HF, TIG-LIFTARC
Latch, Slope down, Post flow
DATA:
136mm x 3620mm x 235mm, 6.3kg
INPUT:
240V 16A (or) 110V 32A (Max)
ATTACHMENTS INCLUDED
TIG TORCH: 8mtr tig 9 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
£55 week: MILLER STARTIG 200 DC
A real workhorse
OUTPUTS:
TIG: 5A/10V - 200A/18V
MMA: 5A/20V - 175A/27V
OCV: 78V,
CONTROLS:
Post-flow, HF
DATA:
125kg. , 2mtr input cable
INPUT:
415V/3PH/16amp
ATTACHMENTS INCLUDED
TIG TORCH: 4mtr tig 17 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
£60 week: KEMPPI MINARC 260 + TU20 TIG UNIT DC
A real workhorse with remote control
OUTPUTS:
TIG: 10A/10.5V - 260A/20.4V
MMA: 10A/20.5V - 260A/30.4V
OCV: 70V,
CONTROLS:
Post-flow, HF, slope up and slope down, pulse, latch
DATA:
85kg
INPUT:
415V/3PH/16amp
ATTACHMENTS INCLUDED
CURRENT REMOTE CONTROL, 20mtr
TIG TORCH: 4mtr tig 17 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
£65 week: NEWARC RT3000
A quality arc and remote control if needed
OUTPUTS:
MMA & TIG: 5amp to 300amp18V, OCV: 75V
CONTROLS:
Selector for MMA (ARC), TIG-HF, TIG-LIFTIG
Latch, Slope up, Slope down, Pre-Post flow
Digital ammeter
DATA:
500mm x 280mm x 400mm, 38kg
INPUT:
415V-3ph-16A (Max)
ATTACHMENTS:
TIG TORCH: 4mtr tig 17 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
TIG AC/DC WELDERS
£75 week: CEBORA TIGSTAR 200 "Square wave"
OUTPUTS:
MMA: 5A/20V to 200A/28V
TIG: 5A/10V to 200A/18V
OCV: 70V
DUTY MMA @ 60% 150/26V
DUTY TIG @ 60% 150A/16V
CONTROLS:
Selector for MMA, TIG DC and TIG AC
Selector for HF or HF constant
Selector for AC tig balance
Slope up and down, gas post flow and latch
DATA:
135kg
INPUT:
415V / 2PH / 22A
ATTACHMENTS INCLUDED
TIG TORCH: 4mtr tig 17 or 26 torch
CABLES: 6mtr earth cable/clamp, 6mtr welding cable/holder
ARGON: 3mtr gas hose + regulator
£85 week: MUREX TRANSTIG 375 + FOOT PEDAL (5mtr)
DC OUTPUT:
OCV 75V and 300A/60% Duty
TIG: 3.5A/10V-350A/24V
MMA: 25A/21V-300A/34V
AC OUTPUT:
OCV 80V and 300A/60% Duty
TIG: 3.0A/10V-375A/25V
MMA: 25A/21V-375A/35V
CONTROLS:
TIG START: HF, Watercooled option
Ammeter, Flowmeter, Latch
DATA:
138kg
INPUT:
415v/45A (60%)
ATTACHMENTS INCLUDED:
Murex 6mtr watercooled tig torch + 6mtr extension
6mrt welding cable and 6mtr earth cable
